Dr. Marina AlcoverAcademic director focused on measurable results and operational excellence in maritime education. Integrates IMO/STCW regulations and ISO 21001/9001 f
Diploma · 800 h · 8 modules
Diploma in Navigation and Control Electronics
This program provides you with the essential skills for the installation, configuration, and maintenance of modern onboard electronic systems. Master the principles of maritime electronics, from navigation sensors and…
Duration800 h
FormatOnline
Starts9 November
Places20 / 20
Prior knowledge
Prior Knowledge Assessment
These are the skills this programme builds. Tick the ones you already have and we will tell you which part of the syllabus is really for you.
Your profile
Tick what you already know to see your result.
Programme overview
What is the Diploma in Navigation and Control Electronics?
The Diploma in Navigation and Control Electronics
This program provides you with the essential skills for the installation, configuration, and maintenance of modern onboard electronic systems. Master the principles of maritime electronics, from navigation sensors and communication systems to the automatic control of engines and propellers. Gain in-depth knowledge of international regulations and best practices to ensure safety and efficiency at sea. This program prepares you to meet the challenges of current and future naval technology.
Differential Advantages
- Practical Approach: Learning based on real-world cases and simulations of common failures.
- Diagnostic Tools: Use of testing equipment and analysis software for troubleshooting.
- Connectivity and Networks: Understanding communication protocols and systems integration.
- Sustainability: Study of emerging technologies in electronics for more efficient and environmentally friendly navigation.
- Certification: Obtain a recognized diploma that boosts your career in the maritime sector.
Programme type
Diploma
Study mode
Online
Duration
800 hours
Modules
8
Start date
27-11-2026
Programme highlights
- Advanced Electronics: Master the latest generation of maritime navigation, communication, and control systems.
- Naval Instrumentation: Delve into the operation and maintenance of radars, GPS, depth sounders, and automation equipment.
- Simulation and Practice: Apply your knowledge in realistic simulated environments, optimizing decision-making on board.
- Regulations and Safety: Understand current legislation and protocols for safe and efficient navigation.
- Professional Certification: Obtain a recognized diploma that will boost your career in the maritime sector.
- Prepare for the challenges of the Modern navigation with comprehensive and cutting-edge training.
Curriculum
Programme Structure
The programme is structured in 8 modules, listed below in order of study.
01
Basics of electronics of navigation and dashboard
- Architecture of integrated electronic navigation systems (INS)
- Command Bridge User Interfaces (Integrated Bridge Systems)
- IMO and SOLAS Regulatory Requirements for Naval Equipment
- Emergency Power Supplies and Power Backups in Navigation
- Distribution of signals and data buses on the bridge
- Electromagnetic interference (EMI) and compatibility (EMC) Marina
- Surge protections and grounding in navigation equipment
- Feeding of electronic equipment
02
Data networks and naval communication protocols
- NMEA 0183 Protocol: Standard, Frames, Speeds and Serial Connection
- NMEA 2000 Protocol: Network Controller Area Network (CAN) Marina and connectors
- Configuration, diagnosis and termination of maritime bus networks
- NMEA OneNet protocols and high-speed Ethernet networks on board
- Marinated wireless networks, Bluetooth and Wi-Fi in instrumentation
- Data multiplexers, protocol converters and gateways
- Monitoring, packet capture and data bus traffic analysis
- NMEA 0183, NMEA 2000 and Ethernet
03
Global Positioning Systems and Radio Navigation
- Principles of Satellite Navigation (GNSS): GPS, GLONASS, Galileo and Beidou
- Augmentation and Accuracy Systems: DGPS, SBAS (WAAS/EGNOS) and RTK
- Propagation error correction, multipath and geometry of satellites
- Marinated antennas, GNSS receivers and output interfaces
- Backup Radio Navigation: Loran-C, Eloran and Satellite Compasses
- Calibration, accuracy verification and drift testing
- Interference detection (pull/spoofing) and cybersecurity in GNS
- GNSS receivers and antennas
04
Radar systems and maritime display (ARPA)
- Principles of marine radar detection in X and S bands
- Traditional pulse technology vs. Solid State Radar (Broadband)
- Signal Processing: Sea Cluster Suppression, Rain & Gain
- ARPA (Automatic Radar Plotting Aid): Acquisition and Tracking
- Vector calculation: CPA (Closest Point of Approach) and TCPA
- Installation, bow alignment and maintenance of transceivers and antennas
- Diagnosis of faults in emission units, magnetrons and receivers
- Radar settings
05
Electronic cartography (ECDIS) and on-board sensors
- ECDIS (Electronic Chart Display and Information System) and RCDS systems
- Vector nautical chart format (ENC S-57/S-101) and raster
- Integration of sensors in ECDIS: position, heading, speed and probe
- Travel data recorders (VDR/S-VDR) and Marine Black Box
- Speed sensors: Doppler and electromagnetic sliders
- Navigation Echoes and High Frequency Fishing Probes
- Maintenance, software upgrade and performance testing
- Heading and Depth Sensors
06
Emergency Identification and Communications Systems
- Automatic Identification System (AIS): Class A, Class B and Transceivers
- Frequencies, VDL modulation and AIS message transmission
- Global Maritime Distress and Security System (GMDSS / SMSSM)
- VHF, MF/HF transceivers, digital selective calls (DSC)
- Claims location radio beacons (EPIRB) and SART responders
- Marine Satellite Communications: Inmarsat, Iridium and VSAT
- Preventive maintenance and regulatory inspection of radiocommunications
- EPIRB and radio beacons
07
Heading control systems, gyros and autopilots
- Magnetic compasses, electromechanical and fibre optic gyps (FOG)
- Principles of orientation, yaw speed and latitude/speed correction
- Marine autopilots: PID and adaptive control algorithms
- Interface between autopilot, steering servo and hydraulic pump
- Rudder Feedback Units (Rudder Feedback) and Calibration
- Autopilot integration with browser routes and ECDIS
- Detection of anomalies in the governance system and safe modes of failure
- Autopilot calibration
08
Maintenance, calibration and fault diagnosis
- Preventive and Predictive Maintenance Strategies in Naval Electronics
- Workshop Instrumentation: Oscilloscopes, Network Analyses and Multimetres
- Systematic diagnosis of faults in electronic cards and interfaces
- Sealing sealing, moisture prevention and corrosive agents
- Management of critical parts, firmware updates and backups
- Port Acceptance Tests (HAT) and Sea Tests (SAT)
- Diagnostic Tools
- Technical documentation, service manuals and wiring schemes
Workload
Study Time and Workload
800 hours of study, online and at your own pace. Move the slider to the hours a week you can really put in.
Hours a week8
Weeks to finish—
You finish around—
Who it is for
Technicians and Engineers seeking to specialize in the installation, configuration, and maintenance of electronic navigation equipment.Merchant Marine Officers interested in deepening their knowledge of ECDIS, radar, AIS, and communications systems, optimizing safety and efficiency in navigation.Electronic and Naval Engineering Students wishing to complement their academic training with a prac
Faculty
Academic direction and faculty
The teaching team at Navalis: working professionals who deliver and oversee the institute's programmes.
Eng. Diego Cifuentes
Cap. Javier Abaroa (MCA)
Dr. Pau Ferrer
Dr. Nuria Llobregat
Eng. Javier Bañuls
Eng. Sofía Marquina
Eng. Tomás Riera
Verified reviews
Student Reviews
Reviews collected and verified by Opynio, not written by us.
Outcomes
Learning Outcomes
- 01Diagnose and resolve faults in electronic navigation systems.
- 02Integrate and calibrate electronic maritime navigation equipment
- 03Manage the operation and maintenance of naval electronic control systems
- 04Apply current regulations on maritime safety and communications
- 05Optimize the energy efficiency of on-board electronic systems
- 06Develop and implement automation solutions for onboard processes
Careers
Career Opportunities
01Electronic Navigation Systems Maintenance Technician: Diagnosis and repair of equipment such as radars, GPS, ECDIS, and communication systems.
02Electronic Navigation Equipment Installer: Assembly and configuration of electronic systems on new and existing vessels.
03Navigation Systems Software Programmer/Developer: Creation and improvement of applications for navigation control and monitoring.
04Marine Electronics Technical Consultant: Advising companies and individuals on the selection, use, and maintenance of electronic navigation equipment.
05Electronic Navigation Equipment Technical Inspector: Verification of compliance with regulations and standards for onboard electronics.
06Marine Electronics Companies Support Technician: Customer service, troubleshooting, and training on equipment use.
07Salesperson/Retailer of Electronic Navigation Equipment: Promotion and sale of electronic navigation products to businesses and individuals.
08Instructor/Trainer in Electronic Navigation Equipment: Delivery of courses and workshops on the use and maintenance of electronic equipment.
09```
Questions
Entry Requirements
Navigation and control electronics.
Yes. The itinerary includes ECDIS/Radar-ARPA/BRM with harbor, ocean, fog, storm, and SAR scenarios.
Online with live sessions; hybrid option for simulator/practical placements through agreements.
Navigation and control electronics.
Recommended functional SMCP. We offer support materials for standard phraseology.
Yes, with a relevant degree or experience in maritime/port operations. The admissions interview will confirm suitability.
Optional (3–6 months) through Companies & Collaborations and the Alumni Network.
Simulator practice (rubrics), defeat plans, SOPs, checklists, micro-tests and applied TFM.
A degree from Navalis Magna Institute + operational portfolio (tracks, SOPs, reports and KPIs) useful for audits and employment.
Online admissions
Admissions Process
No waiting for a phone call. If your documents are complete, you can pay in the same session.
Entry requirements
Academic/Professional Profile:Bachelor's/Undergraduate Degree in Electronic Engineering, Telecommunications, or related technical qualification; or Advanced Vocational Training in Electricity/Electronics with demonstrable experience in naval installations.Previous Knowledge:Basic knowledge of electronics, electricity, networks, and control systems will be valued.Documentation:Updated CV, copy of qualifications/certificates, ID/Passport, cover letter.Skills:Analytical skills, problem-solving abilities, and teamwork skills.```
Questions?
Frequently Asked Questions
Leave your details and admissions will write back. If you already know this is the one, go straight to the application and pay in the same session.