1. Comprehensive Maritime Incident Management: protocols, roles, and chain of command for coordinated response
2. Operational Planning and Execution: briefing, routes, weather windows, and go/no-go criteria
3. Rapid Risk Assessment: criticality matrix, scene control, and decision-making under pressure
4. Operational Communication: VHF/GMDSS, standardized reports, and inter-agency liaison
5. Tactical Mobility and Safe Boarding: RHIB maneuvers, approach, mooring, and recovery
6. Equipment and Technologies: PPE, signaling, satellite tracking, and field data logging
7. Immediate Care of the Affected: primary assessment, hypothermia, trauma, and stabilization for evacuation
8. Adverse Environmental Conditions: swell, Visibility, flows, and operational mitigation

   Simulation and training: critical scenarios, use of VR/AR, and exercises with performance metrics

   Documentation and continuous improvement: lessons learned, indicators (MTTA/MTTR), and SOP updates

1. Introduction to energy efficiency in transport: basic concepts and benefits.
2. Energy consumption analysis: identifying areas for improvement in different modes of transport.
3. Alternative fuels: biofuels, natural gas, hydrogen, and electricity.
4. Technologies for efficiency: efficient engines, aerodynamics, low rolling resistance tires.
5. Fleet management: route optimization, predictive maintenance, and telematics.
6. Efficient driving: driving techniques to reduce fuel consumption.
7. Regulations and standards: emissions standards, incentives, and subsidies.
8. Energy audits: methodology, tools, and report writing.
9. Key performance indicators (KPIs): monitoring and Energy efficiency assessment.
10. Case studies: success stories in cost reduction and energy efficiency improvement.

‘

1. Introduction to Fuel Efficiency: Economic and Environmental Impact
2. Combustion Fundamentals: Types of Fuels, Characteristics, and Optimization
3. Fuel Consumption Analysis: Influencing Factors, Measurement, and KPIs
4. Fuel Efficiency Technologies: Engines, Propulsion Systems, and Additives
5. Speed ​​and Route Optimization: Planning and Monitoring
6. Preventive and Corrective Maintenance: Impact on Fuel Consumption and Equipment Lifespan
7. Efficient Driving: Techniques, Habits, and Staff Training
8. Ballast Management and Trim: Effects on Drag and Fuel Consumption
9. Monitoring and Control Systems: Telemetry, Data Analysis, and Alerts
10. Strategies fuel savings in different operations (transport, industry, etc.)

‘

1. Energy Efficiency Fundamentals: Key concepts, units of measurement, and regulations.
2. Energy Consumption Analysis: Identifying energy consumption sources and usage patterns.
3. Driving Optimization: Efficient driving techniques to reduce fuel consumption.
4. Preventive Maintenance: Impact of maintenance on fuel efficiency and optimization strategies.
5. Fuel Saving Technologies: Systems and devices that improve energy efficiency in vehicles and machinery.
6. Fleet and Route Management: Planning and optimizing routes to minimize fuel consumption.
7. Consumption Monitoring and Control: Tools and techniques for monitoring and analyzing fuel consumption in real-time.
8. Alternative Fuels: Evaluation of alternative fuel options and benefits and their impact on efficiency.
9. Energy Audits: Methodology for conducting energy audits and identifying areas for improvement.
10. Incentives and Subsidies: Programs to support energy efficiency and fuel savings.

‘

1. System Architecture and Components: Structural design, materials, and subsystems (mechanical, electrical, electronic, and fluid) with selection and assembly criteria for marine environments
2. Fundamentals and Principles of Operation: Physical and engineering foundations (thermodynamics, fluid mechanics, electricity, control, and materials) that explain performance and operating limits
3. Safety and Environmental (SHE): Risk analysis, PPE, LOTO, hazardous atmospheres, spill and waste management, and emergency response plans
4. Applicable Regulations and Standards: IMO/ISO/IEC requirements and local regulations;
5. Conformance criteria, certification, and best practices for operation and maintenance
6. Inspection, testing, and diagnostics: Visual/dimensional inspection, functional testing, data analysis, and predictive techniques (vibration, thermography, fluid analysis) to identify root causes
7. Preventive and predictive maintenance: Hourly/cycle/seasonal plans, lubrication, adjustments, calibrations, consumable replacement, post-service verification, and operational reliability
8. Instrumentation, tools, and metrology: Measuring and testing equipment, diagnostic software, calibration and traceability; selection criteria, safe use, and storage
9. Onboard integration and interfaces: Mechanical, electrical, fluid, and data compatibility; Sealing and watertightness, EMC/EMI, corrosion protection, and interoperability testing.

   Quality, acceptance testing, and commissioning: process and materials control, FAT/SAT, bench and sea trials, go/no-go criteria, and evidence documentation.

   Technical documentation and integrated practice: logs, checklists, reports, and a complete case study (safety → diagnosis → intervention → verification → report) applicable to any system.

1. Introduction to Energy Efficiency: Basic Concepts and Definitions
2. Marine Fuels: Types, Properties, Quality, and Regulations
3. Fuel Consumption Analysis: Influencing Factors (Hull, Propulsion, Environmental Conditions)
4. Optimizing Speed ​​and Route: Strategies to Reduce Consumption
5. Managing Trim and Draft: Impact on Drag
6. Hull and Propeller Maintenance: Cleaning, Antifouling Paint, and Polishing
7. Energy Efficiency Technologies: Heat Recovery Systems, LED Lighting, etc.
8. Alternative Propulsion Systems: LNG, Methanol, Hydrogen, and Batteries
9. Performance Monitoring: Key Performance Indicators (KPIs) and analytical tools
10. International regulations and agreements: IMO, EEDI, SEEMP and their impact

‘

1. Introduction to Energy Efficiency: Basic Concepts and Their Importance.
2. Fuels: Types, Characteristics, Properties, and Safe Storage.
3. Internal Combustion Engines: Operating Principles, Types, and Efficiency.
4. Propulsion Systems: Optimizing Performance and Reducing Consumption.
5. Fuel Management: Inventory Control, Consumption Monitoring, and Loss Prevention.
6. Preventive Maintenance: Impact on Engine Efficiency and Fuel Savings.
7. Efficient Driving Techniques: Acceleration, Braking, Speed, and Anticipation.
8. Tires: Pressure, Alignment, and Their Influence on Fuel Consumption.
9. Fuel Saving Technologies: Start-Stop Systems, Energy Recovery, and Aerodynamics.
10. Data analysis and monitoring: Identifying areas for improvement and optimizing fuel consumption.

‘

1. Introduction to Energy Efficiency: Key Concepts and Benefits
2. Fuels: Types, Characteristics, Properties, and Regulations
3. Consumption Analysis: Data Collection, Metrics, and Indicators
4. Energy Performance Assessment: Identifying Areas for Improvement
5. Driving Optimization: Efficient Driving Techniques
6. Preventive Maintenance: Impact on Fuel Consumption
7. Fuel-Saving Technologies: Systems and Devices
8. Fleet Management: Route Planning and Load Optimization
9. Fuel Costs: Analysis, Control, and Reduction Strategies
10. Implementing an Energy Efficiency Plan: Steps and Monitoring

‘

1. Energy Efficiency Fundamentals: Key concepts, units, and metrics.
2. Basic Thermodynamics: Thermodynamic cycles, internal combustion engine efficiency.
3. Fuel Consumption Analysis: Factors influencing consumption, telemetry.
4. Efficient Driving Techniques: Acceleration, braking, speed maintenance, anticipation.
5. Preventive Maintenance: Impact of maintenance on fuel efficiency, inspection of critical components.
6. Tires and Alignment: Tire pressure, alignment, and their effect on rolling resistance.
7. Aerodynamics and Air Resistance: Vehicle design, modifications, and accessories that improve aerodynamics.

Aerodynamics.

8. Alternative Propulsion Systems: Hybrid, electric, and hydrogen vehicles: advantages and disadvantages.
9. Route Planning and Logistics: Route optimization, fleet management, and mileage reduction.
10. Fuel-Saving Technologies: Start-Stop systems, adaptive cruise control, and electronic engine management.

‘