1. Comprehensive Maritime Incident Management: protocols, roles, and chain of command for coordinated response
2. Operational Planning and Execution: briefing, routes, weather windows, and go/no-go criteria
3. Rapid Risk Assessment: criticality matrix, scene control, and decision-making under pressure
4. Operational Communication: VHF/GMDSS, standardized reports, and inter-agency liaison
5. Tactical Mobility and Safe Boarding: RHIB maneuvers, approach, mooring, and recovery
6. Equipment and Technologies: PPE, signaling, satellite tracking, and field data logging
7. Immediate Care of the Affected: primary assessment, hypothermia, trauma, and stabilization for evacuation
8. Adverse Environmental Conditions: swell, Visibility, flows, and operational mitigation

   Simulation and training: critical scenarios, use of VR/AR, and exercises with performance metrics

   Documentation and continuous improvement: lessons learned, indicators (MTTA/MTTR), and SOP updates

1. Introduction to Marine Diesel Engines: Types, Components, and Systems
2. Fundamentals of Thermodynamics: Diesel Cycle, Efficiency, and Performance
3. Fuel Systems: Injection, Pumps, Filters, and Regulators
4. Lubrication Systems: Types of Lubricants, Oil Filtration, and Analysis
5. Cooling Systems: Types of Coolants, Pumps, and Heat Exchangers
6. Intake and Exhaust Systems: Turbochargers, Intercoolers, Air Filters, and Mufflers
7. Electrical Systems: Starting, Charging, Batteries, and Wiring
8. Instrumentation and Control: Sensors, Actuators, and Systems Monitoring.
9. Regulations and Safety: Maritime regulations and safety procedures.
10. Technical Documentation: Manufacturer’s manuals, drawings, and specifications.

‘

1. Introduction to Marine Diesel Fuel Systems: Components and Functions
2. Marine Diesel Fuels: Types, Properties, Specifications, and Standards (ISO 8217)
3. Injection Systems: Injection Pumps, Injectors, Common Rail, Electronic Control Systems
4. Fuel Filtration: Types of Filters, Water Separators, Maintenance, and Replacement
5. Lubrication of Marine Diesel Engines: Types of Lubricants, Properties, Lubrication Systems, Oil Cooling
6. Oil Analysis: Interpretation of Results, Troubleshooting, and Corrective Actions
7. Cooling Systems: Types, Components, Maintenance, and Temperature Control
8. Fuel and Lubricant Management: Storage, Transfer, Consumption, Records.
9. Fuel and lubrication system fault diagnosis: causes, symptoms, and solutions.
10. Preventive and corrective maintenance: procedures, tools, and safety.

‘

1. Introduction to Fuel Systems: Types of fuels, properties, and regulations.
2. Fuel Supply Systems: Components, operation, and maintenance.
3. Fuel Injection: Types of injection systems, calibration, and troubleshooting.
4. Lubrication: Types of lubricants, properties, lubrication systems, and oil analysis.
5. Cooling Systems: Types of systems, components, coolants, and preventive maintenance.
6. Thermostats and Temperature Sensors: Operation, diagnosis, and replacement.
7. Water Pumps and Fans: Types, maintenance, and troubleshooting.
8. Filters: Types of filters (fuel, oil, air), replacement, and maintenance.
9. Fault Diagnosis in Fuel, Lubrication, and Cooling Systems: Methodologies and Tools.
10. Safety and Best Practices: Handling of Fuels and Lubricants, Fire Prevention, and Environmental Protection.

‘

1. System Architecture and Components: Structural design, materials, and subsystems (mechanical, electrical, electronic, and fluid) with selection and assembly criteria for marine environments
2. Fundamentals and Principles of Operation: Physical and engineering foundations (thermodynamics, fluid mechanics, electricity, control, and materials) that explain performance and operating limits
3. Safety and Environmental (SHE): Risk analysis, PPE, LOTO, hazardous atmospheres, spill and waste management, and emergency response plans
4. Applicable Regulations and Standards: IMO/ISO/IEC requirements and local regulations;
5. Conformance criteria, certification, and best practices for operation and maintenance
6. Inspection, testing, and diagnostics: Visual/dimensional inspection, functional testing, data analysis, and predictive techniques (vibration, thermography, fluid analysis) to identify root causes
7. Preventive and predictive maintenance: Hourly/cycle/seasonal plans, lubrication, adjustments, calibrations, consumable replacement, post-service verification, and operational reliability
8. Instrumentation, tools, and metrology: Measuring and testing equipment, diagnostic software, calibration and traceability; selection criteria, safe use, and storage
9. Onboard integration and interfaces: Mechanical, electrical, fluid, and data compatibility; Sealing and watertightness, EMC/EMI, corrosion protection, and interoperability testing.

   Quality, acceptance testing, and commissioning: process and materials control, FAT/SAT, bench and sea trials, go/no-go criteria, and evidence documentation.

   Technical documentation and integrated practice: logs, checklists, reports, and a complete case study (safety → diagnosis → intervention → verification → report) applicable to any system.