1. Comprehensive Maritime Incident Management: protocols, roles, and chain of command for coordinated response
2. Operational Planning and Execution: briefing, routes, weather windows, and go/no-go criteria
3. Rapid Risk Assessment: criticality matrix, scene control, and decision-making under pressure
4. Operational Communication: VHF/GMDSS, standardized reports, and inter-agency liaison
5. Tactical Mobility and Safe Boarding: RHIB maneuvers, approach, mooring, and recovery
6. Equipment and Technologies: PPE, signaling, satellite tracking, and field data logging
7. Immediate Care of the Affected: primary assessment, hypothermia, trauma, and stabilization for evacuation
8. Adverse Environmental Conditions: swell, Visibility, flows, and operational mitigation

   Simulation and training: critical scenarios, use of VR/AR, and exercises with performance metrics

   Documentation and continuous improvement: lessons learned, indicators (MTTA/MTTR), and SOP updates

1. Introduction to Naval Energy Consumption Simulation: Objectives and Benefits.
2. Fundamentals of Thermodynamics applied to Naval Systems: Power and Refrigeration Cycles.
3. Modeling of Main Components: Engines, Boilers, Turbines, Pumps, and Compressors.
4. Propulsion System Simulation: Behavior Modeling and Optimization.
5. Analysis of Loads and Operating Profiles: Identifying Consumption Patterns.
6. Optimizing Onboard Energy Management: Strategies and Technologies.
7. Integrating Renewable Energies: Solar, Wind, and Other Systems.
8. Energy Efficiency Analysis: Key Performance Indicators (KPIs) and Metrics.
9. Simulation Tools: Software and Platforms for Analysis and Optimization.
10. Case studies and practical applications: Examples of fuel consumption optimization in different types of vessels.

‘

1. Introduction to Energy Optimization in Boating: Key Concepts and Benefits.
2. Analysis of Energy Consumption on Board: Identifying Areas for Improvement.
3. Propulsion System Efficiency: Optimizing Propellers, Engines, and Transmissions.
4. Efficient Auxiliary Systems: LED Lighting, Optimized Climate Control, Low-Consumption Pumps.
5. Energy Management on Board: Monitoring, Control, and Automation of Consumption.
6. Alternative Fuels: Biofuels, Liquefied Natural Gas (LNG), Hydrogen, Electricity.
7. Energy Storage Systems: Batteries, Supercapacitors, and Their Application in Boating.
8. Renewable Energies on Board: Photovoltaic Solar, Wind, and other alternative sources.
9. Regulations and certifications in energy efficiency and alternative fuels.
10. Case studies and success stories in energy optimization for vessels.

‘

1. Introduction to Naval Energy Consumption: Context, Environmental and Economic Impact
2. Fundamentals of Thermodynamics and Fluid Mechanics: Thermodynamic Cycles, Efficiency, Energy Losses
3. Analysis of the Propulsion System: Main Engines, Shaft Lines, Propellers, Propulsive Performance
4. Auxiliary Systems: Electrical Generation, HVAC, Cooling, Water Treatment, Associated Consumption
5. Measurement and Monitoring of Consumption: Sensors, Instrumentation, Data Acquisition Systems
6. Modeling and Simulation of Energy Consumption: Software Tools, Calibration and Validation
7. Optimization of Consumption: Operational Strategies, Predictive Maintenance, Design Improvements
8. Alternative Fuels: LNG, Methanol, Ammonia, Hydrogen, Impact on Consumption and… Emissions

   Renewable energy on board: solar, wind, heat recovery, integration into the energy system
   Regulations and standards: IMO, EU, classification, marine energy efficiency

   ‘

1. Introduction to ship energy consumption simulation.
2. Ship modeling: geometry, resistance, hydrodynamics.
3. Propulsion systems: main engines, auxiliary engines, propellers, control systems.
4. Energy consumption during navigation: influencing factors, load modeling, calculating consumption under different conditions.
5. Consumption simulation: simulation tools and software, model validation.
6. Route optimization: influence of weather and ocean conditions, optimization algorithms.
7. Ship operation optimization: speed, trim, ballast management.
8. Energy recovery systems: ORC, waste heat, solar and wind energy.
9. Scenario Analysis: Evaluation of different propulsion and operating options.
10. Case Studies: Application of simulation and optimization to different types of vessels.

‘

1. System Architecture and Components: Structural design, materials, and subsystems (mechanical, electrical, electronic, and fluid) with selection and assembly criteria for marine environments
2. Fundamentals and Principles of Operation: Physical and engineering foundations (thermodynamics, fluid mechanics, electricity, control, and materials) that explain performance and operating limits
3. Safety and Environmental (SHE): Risk analysis, PPE, LOTO, hazardous atmospheres, spill and waste management, and emergency response plans
4. Applicable Regulations and Standards: IMO/ISO/IEC requirements and local regulations;
5. Conformance criteria, certification, and best practices for operation and maintenance
6. Inspection, testing, and diagnostics: Visual/dimensional inspection, functional testing, data analysis, and predictive techniques (vibration, thermography, fluid analysis) to identify root causes
7. Preventive and predictive maintenance: Hourly/cycle/seasonal plans, lubrication, adjustments, calibrations, consumable replacement, post-service verification, and operational reliability
8. Instrumentation, tools, and metrology: Measuring and testing equipment, diagnostic software, calibration and traceability; selection criteria, safe use, and storage
9. Onboard integration and interfaces: Mechanical, electrical, fluid, and data compatibility; Sealing and watertightness, EMC/EMI, corrosion protection, and interoperability testing.

   Quality, acceptance testing, and commissioning: process and materials control, FAT/SAT, bench and sea trials, go/no-go criteria, and evidence documentation.

   Technical documentation and integrated practice: logs, checklists, reports, and a complete case study (safety → diagnosis → intervention → verification → report) applicable to any system.