1. Comprehensive Maritime Incident Management: protocols, roles, and chain of command for coordinated response
2. Operational Planning and Execution: briefing, routes, weather windows, and go/no-go criteria
3. Rapid Risk Assessment: criticality matrix, scene control, and decision-making under pressure
4. Operational Communication: VHF/GMDSS, standardized reports, and inter-agency liaison
5. Tactical Mobility and Safe Boarding: RHIB maneuvers, approach, mooring, and recovery
6. Equipment and Technologies: PPE, signaling, satellite tracking, and field data logging
7. Immediate Care of the Affected: primary assessment, hypothermia, trauma, and stabilization for evacuation
8. Adverse Environmental Conditions: swell, Visibility, flows, and operational mitigation

   Simulation and training: critical scenarios, use of VR/AR, and exercises with performance metrics

   Documentation and continuous improvement: lessons learned, indicators (MTTA/MTTR), and SOP updates

1. Introduction to Hybrid Propulsion: Basic Concepts and Architectures
2. Aerodynamics and Hydrodynamics: Fundamental Principles for Wind Efficiency
3. Wind Turbines: Types, Operation, Control, and Preventive Maintenance
4. Batteries and Energy Storage Systems: Technologies, Management, and Safety
5. Energy Management and Control Systems: Optimization and Operating Strategies
6. Internal Combustion Engines: Operation, Maintenance, and Optimization for Hybrid Systems
7. Lubrication and Cooling Systems: Maintenance and Failure Analysis
8. Power Electronics: Inverters, Converters, Rectifiers, and Their Maintenance
9. Safety in Hybrid and Wind Power Systems: Regulations, procedures, and protective equipment.
10. Troubleshooting and troubleshooting: Methodologies and tools.

‘

1. Introduction to Hybrid Propulsion: Concepts, Advantages, and Disadvantages
2. Wind Energy Fundamentals: Wind Turbines, Types, and Components
3. Energy Storage Systems: Batteries, Supercapacitors, and Others
4. Components of a Hybrid Propulsion System: Motors, Generators, and Power Electronics
5. Integrating Wind Energy into Hybrid Systems: Design and Considerations
6. Energy Control and Management Systems: Performance and Efficiency Optimization
7. Safety in Hybrid and Wind Propulsion Systems: Electrical, Mechanical, and Environmental Hazards
8. Operation and Maintenance Procedures: Inspection, Diagnosis, and Repair
9. Safety Standards and Regulations: IEC, UL, and Other Applicable Regulations
10. Simulations and testing of hybrid and wind propulsion systems.

‘

1. Introduction to Sustainable Propulsion and Naval Energy Efficiency
2. Alternative Fuels: Biofuels, Methanol, Ammonia, and Hydrogen
3. Hybrid Propulsion Systems: Configurations, Advantages, and Challenges
4. Optimizing Hull Performance: Cleaning, Coatings, and Design
5. Naval Aerodynamics: Rotor Sails, Kites, and Other Wind Technologies
6. Energy Management Systems: Control, Monitoring, and Optimization
7. Efficiency in Auxiliary Systems: HVAC, Lighting, and Refrigeration
8. Waste Heat Recovery: Organic Rankine Cycles and Thermoelectricity
9. International Standards and Regulations: IMO, EEDI, SEEMP, CII
10. Life cycle assessment and economic evaluation of sustainable technologies

‘

1. Introduction to Alternative Propulsion: Need, Types, and Current Landscape.
2. Alternative Fuels: LNG, Methanol, Ammonia, Hydrogen, Biofuels – Properties, Handling, and Safety.
3. Hybrid Propulsion Systems: Batteries, Fuel Cells, Energy Management Systems.
4. Energy Efficiency: Hydrodynamic Optimization, Hull Management, Heat Recovery Systems.
5. International Regulations: IMO, GHG Emissions, EEDI, SEEMP, CII.
6. Safety in Design: Risk Assessment, Hazardous Areas, Fire Detection and Suppression Systems.
7. Operational Safety: Emergency Procedures, Crew Training, Risk Management in Fuel Handling.
8. Cybersecurity in propulsion systems: protection of control and monitoring systems.
9. Maintenance and monitoring: predictive analytics, inspections, component lifecycle management.
10. Case studies: LNG-powered vessels, hybrid vessels, challenges and solutions.

‘

1. System Architecture and Components: Structural design, materials, and subsystems (mechanical, electrical, electronic, and fluid) with selection and assembly criteria for marine environments
2. Fundamentals and Principles of Operation: Physical and engineering foundations (thermodynamics, fluid mechanics, electricity, control, and materials) that explain performance and operating limits
3. Safety and Environmental (SHE): Risk analysis, PPE, LOTO, hazardous atmospheres, spill and waste management, and emergency response plans
4. Applicable Regulations and Standards: IMO/ISO/IEC requirements and local regulations;
5. Conformance criteria, certification, and best practices for operation and maintenance
6. Inspection, testing, and diagnostics: Visual/dimensional inspection, functional testing, data analysis, and predictive techniques (vibration, thermography, fluid analysis) to identify root causes
7. Preventive and predictive maintenance: Hourly/cycle/seasonal plans, lubrication, adjustments, calibrations, consumable replacement, post-service verification, and operational reliability
8. Instrumentation, tools, and metrology: Measuring and testing equipment, diagnostic software, calibration and traceability; selection criteria, safe use, and storage
9. Onboard integration and interfaces: Mechanical, electrical, fluid, and data compatibility; Sealing and watertightness, EMC/EMI, corrosion protection, and interoperability testing.

   Quality, acceptance testing, and commissioning: process and materials control, FAT/SAT, bench and sea trials, go/no-go criteria, and evidence documentation.

   Technical documentation and integrated practice: logs, checklists, reports, and a complete case study (safety → diagnosis → intervention → verification → report) applicable to any system.